Need Some Ideas for Making a Bed Frame?

My parents have put together something that would work perfectly for you. They made a bed platform using sheets of 3/8" or 1/2" plywood (not sure which). They measured the queen mattress, then cut two sheets of plywood to the same size. One sheet is not big enough, so they put two pieces side by side (I don't mean to put two sheets on top of each other). They rounded the corners and put hand holes to make it easier to handle and to avoid shin bruises.

To support the platform they made three upright crosspieces the width of the bed and two upright pieces the length of the bed. They slotted the pieces so they would fit together and stand up by themselves. (Like cheap pressboard bookshelves that slide together with no nails or glue).

Then they just put the two platform pieces side by side on top of the base and put the mattress on top. They have moved it at least three times and it is really easy because the pieces just slide back apart and stack to go into the moving van.

You can go to a furniture store that sells mattresses and box springs and buy a metal frame. They are pretty cheap. We paid less than $35 for ours.

You can go to a mattress store and purchase a metal bed frame that will hold your box spring and mattress for about $23-35. These come in two or three pieces depending on the type. As for a headboard, you could purchase a sheet of plywood and cover will batting.

You could join Freecycle.org and ask for a bed frame and a two piece box spring. Freecycle is a group that recycles things people don't want anymore. You can find a local group in your area. Everything is FREE.

pm omoth

July 17, 20050 found this helpful

My husband and I were recently shopping for a new bed. And all the mattress stores were featuring wooden platforms in place of a box springs for the mattress to sit on.

No need to spend money on box springs that are going out of style anyway. Even if you wanted to.

So one suggestion would be to search yardsales, etc for a queen size waterbed frame. Double plus will be the drawers in the bottom.

Thanks so much for all your ideas, I'll be sure to check some of them out!
Justina

In desparation you could cover cement blocks with material to protect floors and support the box spring and mattress. we have done this in past.

I made a really nice strong bed frame using old 2x4's. I could put bins underneath, and I used some foam to padd the edges of the bed, and fabric to hide the foam and under the bed.

Ikea has a Queen size bedframe by DALSELV for $99.99 It's easy to transport and put together. The wood is unfinished and you can paint it any way you like. I have this bed and love it. Here's the link:
www.ikea.com/.../50021627

My dad assembled a bed for my sister when she visited their cottage one summer. He bought a large sheet of plywood and cut up a few 2x8s. The sheet was supported by the 2x8s. He created pillars out of the 2x8s by cutting notches halfway into their centres, enabling him to interlock them like X's, creating an 8 inch platform.

I saw on instructables.com that someone had solved this problem with bankers boxes, and you get free storage too.

windwoo27

December 3, 20220 found this helpful

We had a similar problem after a housefire; the layer of new wallboard they put on the stairwell was just enough to make it impossible to get our queen box spring up the stairs. Our bed was new and the store was good enough to replace the queen with two single box springs. We just laid the mattress across both. You could check out used furniture stores for two good twin size box springs and do the same thing. Take a measuring tape to make sure they're both the same height. Or for minimum cash, pick up some free pallets and stack them to the level you want. Toss a thick blanket over them before putting your good mattress on top - and take a measuring tape.